Skip to content
EcoinSupply

Guide

Dilution Maths: Calculating Annual Inflation From an Emission Schedule

The arithmetic behind a token's annual dilution rate, with a worked example and the common mistakes that make the number wrong without looking wrong.

Dilution maths is not complicated arithmetic — it is one division and one multiplication — but it is easy to get a confidently wrong answer by plugging in the wrong inputs. This guide walks through the formula, a worked example with hypothetical numbers, and the specific mistakes that produce a dilution figure that looks plausible but measures the wrong thing.

The basic formula

Annual dilution rate equals new issuance over a twelve-month period, divided by the circulating supply at the start of that period, expressed as a percentage:

Annual dilution % = (new units issued in 12 months / circulating supply at period start) x 100

This answers a specific question: if you hold a fixed number of tokens and do nothing, how much does your percentage ownership of circulating supply shrink over a year, assuming no one else’s holdings change either. It is a measure of dilution to existing holders, not a measure of price impact — those are related but distinct questions, and this guide stays on the supply side of that line.

Worked example

Suppose a hypothetical token has a circulating supply of 500,000,000 units at the start of the year, and its protocol issues a flat 40,000 new units per day through staking rewards. Annual issuance is 40,000 x 365 = 14,600,000 units. Dividing by circulating supply: 14,600,000 / 500,000,000 = 0.0292, or 2.92% annual dilution. If that same protocol also burns 10,000 units a day in transaction fees, annual burn is 3,650,000 units, and net annual issuance is 14,600,000 – 3,650,000 = 10,950,000. Net dilution becomes 10,950,000 / 500,000,000 = 2.19%. The gap between 2.92% and 2.19% is exactly why “gross issuance” and “net issuance” are not interchangeable terms, and why this site’s guide on burn mechanisms is worth reading alongside this one.

Where the denominator gets chosen badly

Circulating supply, total supply and max supply answer different questions, and swapping one in for another changes the result without changing the label on the chart. Circulating supply is what is actually transferable today. Total supply usually includes locked or vested tokens that exist but are not yet tradable. Max supply is a hard ceiling that may be far above current total supply, or may not exist at all for an uncapped protocol. If you want “how much does my ownership share shrink this year,” use circulating supply. If you want “how much issuance capacity remains before the schedule is exhausted,” total or max supply is the relevant reference instead. The guide on this site that defines these three terms in full is the companion piece to this one.

Where block-time assumptions sneak in errors

Many schedules are defined in blocks, not days — “X units per block,” or “halving every 210,000 blocks.” Converting that into an annual figure requires an assumed block time, and actual average block time drifts with network conditions (difficulty adjustments, validator participation, and so on). A schedule that assumes a 10-minute block time will overstate or understate annual issuance if the network has been averaging 9.5 or 10.5 minutes recently. For most purposes the difference is small, but for precise work, pull the actual average block interval over a recent window rather than assuming the protocol’s target figure held exactly.

Where the measurement window distorts the annualized number

Annualizing from a short sample period amplifies whatever happened to be unusual in that window. If you measure issuance over a single week that included an irregular event — a one-off foundation mint, a temporary spike in staking participation, a burst of fee-burn activity around a busy period — and multiply by 52 to get an annual figure, you have annualized the anomaly along with the baseline rate. Prefer a full year of actual data when it exists, or at minimum a window long enough to average out routine variance, and say explicitly which window you used.

Comparing dilution across assets fairly

Once you can calculate one asset’s net annual dilution correctly, the comparison itself needs matching inputs on both sides: same choice of denominator (circulating vs. total), same treatment of burns (gross vs. net), and ideally the same measurement window. A PoW chain’s dilution schedule is a near-deterministic function of block height, so it is simple to project forward. A PoS chain’s dilution can move with staking participation, so last year’s rate is a starting point, not a guarantee for next year. Comparing the two requires acknowledging that one number is far more stable going forward than the other, even if they happen to match today.

Where to pull live inputs instead of guessing

This guide deliberately uses invented numbers so the arithmetic is clean to follow. For a real asset, pull circulating supply, the current issuance rate, and any stated burn rate from sourced figures rather than estimating them. Each tracked asset’s Supply Clock readout on each coin page states the annual issuance rate and dilution percentage it has calculated, alongside the circulating, total and max supply inputs and the time they were fetched, so you can check the arithmetic yourself rather than take the headline number on faith. The tools include a dilution calculator built around this same formula if you want to run your own scenario.

A second worked example: a step-down schedule mid-transition

The earlier example assumed a flat daily issuance rate for the full year, which works cleanly for a steady Proof of Stake-style schedule but understates the arithmetic needed around a Proof of Work halving. Suppose a hypothetical network halves its block reward partway through the twelve- month window you are measuring: for the first four months it issues at a rate equivalent to 8,000,000 units a year, and after the halving, for the remaining eight months, at a rate equivalent to 4,000,000 units a year. Actual issuance for the full year is (8,000,000 x 4/12) + (4,000,000 x 8/12) = 2,666,667 + 2,666,667 = 5,333,333 units — not simply the pre-halving or post-halving annualized figure on its own, and notably not the midpoint of the two annualized rates either, because the split in time was not even. Dividing by a circulating supply of 250,000,000 at the start of the period gives 5,333,333 / 250,000,000 = 2.13% actual dilution for that year, a figure a naive “just annualize the current rate” calculation done on day one of the year would have overstated by annualizing the higher, pre-halving rate across all twelve months instead.

A short checklist before quoting a dilution figure

  • Confirm which supply figure is the denominator — circulating or total — and state it explicitly alongside the percentage.
  • Confirm whether the issuance figure is gross or net of burns, and use net issuance if you want a figure that reflects actual ownership dilution.
  • Check whether a scheduled step-down (a halving or similar cut) falls inside your measurement window, and weight the periods before and after it by time rather than averaging the two rates evenly.
  • State the measurement window and the date the underlying supply figures were fetched, since both circulating supply and issuance rate can move between when you calculate a figure and when someone else reads it.

Why dilution does not simply compound the way interest does

The annual dilution formula in this guide is a simple percentage for a single year, not a compounding rate, and treating multi-year dilution as “rate times number of years” overstates the real effect, because each year’s dilution applies to a circulating supply that has already grown from the prior year’s issuance — the same reason a fixed percentage shrinks a holder’s ownership share by a slightly smaller absolute amount each successive year even if the percentage itself stays constant. A token diluting at a flat 3% a year does not reduce a static holder’s ownership share by 30% over ten years; compounding (1 – 0.03) across ten years gives roughly a 26% cumulative reduction in ownership share, noticeably less than the simple multiplication would suggest. For a single year’s figure, which is what most dashboards quote, the simple formula is the right tool; for projecting several years forward, compound the yearly retention factor rather than multiplying the annual rate by the number of years.

Risk note

Dilution is a measure of supply growth relative to existing holders, not a forecast of price. High dilution does not automatically mean a price will fall, and low dilution does not automatically mean it will rise — demand-side factors this guide does not cover matter at least as much. Use the formula to understand the mechanism, not to generate a trade signal.

Not financial advice. This guide explains how supply mechanics work so you can read them yourself; it does not recommend buying, holding, or selling any asset, and none of the worked numbers in this guide are live market data.

Frequently asked questions

What is the basic formula for annual dilution?

Annual new issuance divided by current circulating supply, expressed as a percentage. If a network issues 5,000,000 new units over a year and circulating supply at the start of that year was 200,000,000, dilution is 5,000,000 divided by 200,000,000, or 2.5%.

Should I use circulating supply or total supply as the denominator?

For a holder's own dilution -- how much their percentage ownership shrinks -- circulating supply is the more honest denominator, since that is the supply actually competing for the same ownership share today. Total or max supply answers a different question: how much issuance remains before the schedule is exhausted.

Does burning tokens reduce the dilution rate?

Yes, if you calculate net issuance (new mint minus burn) rather than gross issuance. A protocol that mints 5% a year and burns 2% a year through fees has a net dilution rate of roughly 3%, not 5%, and that is the number that matters for ownership-share arithmetic.

Why do two sources sometimes report different dilution rates for the same asset?

Common causes are using total supply instead of circulating supply as the denominator, measuring gross issuance instead of net of burns, annualizing from a short sample period with unusual activity, or using stale supply figures. Check which inputs a source used before treating its percentage as comparable to another site's.

Not financial advice. Ecoin Supply describes how crypto-asset supply works and what public sources report. Crypto-assets are volatile and you can lose all of the money you put in. Nothing on this site is a recommendation to buy, sell or hold any asset, and no figure here is a price prediction.